Ultimate Weathering Wash Winter

Product code: UMP024
£5.99
PayPal Checkout
  • 50ml container
  • Non-Toxic
  • Non-Flammable
  • Clay based product
  • Apply with brush or airbrush
  • Shake well before use
  • Cleans with water

Ultimate Weathering Wash Winter is a non-toxic, non-flammable weathering wash specifically designed for modelling. This product can be mixed with other clay based washes from Ultimate Weathering Products to vary the tone if needed

Directions for use - 

  1. Shake & stir well.
  2. Apply liberally (all over) model with a brush or airbrush.
  3. Allow to dry, for a minimum of 30 minutes.
  4. Lightly moisten a paper towel, cotton bud or similar & gently wipe off in the direction you want the flow to go.
  5. Excess will be left in the panel lines & recesses to give a well used & weathered effect. 

Top Tip - This wash is best applied over a clear coat. Applying over a gloss coat will allow for easier removal, if applied over a matt coat the wash will be harder to remove, vary the clear coat depending on required result.

This product does benefit from a good shake before using as it does tend to settle. Decanting the required amount of product onto a palette can sometimes be a good idea as this gives you added control & more consistent results.

GTIN 5060376670219
Brand Ultimate Modelling Products
Product Code UMP024
Weight 0.065kg